Call a Mac expert! 888-769-7629
Your Shopping Cart Your Shopping Cart: 0 Items

Your cart is empty.

Smartonline 6000va Puresine 6kva 120-240v 12out Cust Pays F / Mfr. No.: Su6000rt4u

Smartonline 6000va Puresine 6kva 120-240v 12out Cust Pays F / Mfr. No.: Su6000rt4u
$3,142.00
IN STOCK
Qty. Available: 1
Item Number: tri-su6000rt4u
Vendor Number: SU6000RT4U
Vendor: Tripp Lite
Note: Shipping charges are not subsidized on this item.
Chat with or call a Mac expert at 1-888-769-76291-888-769-7629
Shipping: Usually ships within 24 hours.

Tripp Lite's PowerAlert Software, version 12, has tested compatible with Cisco CallManager, versions 3.3(4)-MCS and 4.0(2)-MCS. Click logo for disclaimer.

Tripp Lite is a Cisco Technology Developer Partner in the Cisco Technology Developer Program.

6000VA / 6kVA on-line, double-conversion, extended run, 4U all-in-one rack / tower UPS

Maintains dual 208/120 or 240/120V output +/-3% during brownouts and overvoltages (4 wire split-phase input)

Simultaneous use HID compliant USB port, serial port, SNMP/Web card slot and EPO interface - front panel LCD digital display for real-time site electrical and detailed UPS operating parameters

Detachable plug & outlet panel with auto/manual bypass and fault tolerant design enables hot-swap UPS replacement without powering off connected equipment

Expandable runtime with optional BP192V12-3U external battery packs

$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

 

KEY BUYING POINTS

  • True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
  • 6000VA / 4200 watt output power capacity with dual voltage output of 208/120 or 240/120V
  • 4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces
  • Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
  • Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment
  • Optional SUPDM56HW installable backplate accessory enables hardwire input-output connections with bypass switch and hot-swap UPS replacement support
  • Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
  • Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages
  • Supports connected equipment during blackouts for 24/9 minutes at half/full load levels, runtime is further expandable with optional external battery packs
  • Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot
  • Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
  • Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
  • Built-in Emergency Power Off (EPO) interface with cable
  • Includes 12 built-in output receptacles (2 L6-30R, 2 L6-20R, 8 NEMA 5-15/20R)
  • L14-30P split phase, 4 wire plug-in connection (featured on included detachable PDU). Optional SUPDM56HW hardwire input/output PDU available separately
  • Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
  • Front panel switches enable power on/off control, self-test and alarm cancel functions
  • Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures
  • UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
  • Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
  • Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment
  • 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

TYPICAL APPLICATIONS

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

OPTIONS & ACCESSORIES

  • SNMP accessories: SNMPWEBCARD ,ENVIROSENSE
  • External battery pack: BP192V12-3U
  • Dataline protectors: DNET1 ,DTEL2 ,DCATV
  • Extended warranties: 3 Year WEXT3-SU6000 , 5 Year WEXT5-SU6000
  • Start-up service plus on-site warranties: 2 Year WOS2-6K , 3-Year WOS3-6K , 5 Year WOS5-6K
  • Start-up service only: WSTRTUP-6-10K

PACKAGE INCLUDES

  • SU6000RT4U UPS System (with SUPDMB56 detachable PDU module)
  • USB, DB9 and EPO cabling
  • Rackmount installation kit for 4 post rack enclosures and tower stands for upright tower installation
  • Owner's manual and warranty information

General Information

ManufacturerTripp Lite
Manufacturer Part NumberSU6000RT4U
Manufacturer Website Addresshttp://www.tripplite.com
Product LineSmartOnline
Product ModelSU6000RT4U
Product NameSmartOnline 6000VA Rack-mountable Tower
Product TypeDual Conversion Online UPS

Technical Information

Plug/Connector TypeNEMA L14-30P
Receptacles2 x NEMA L6-20R
Bypass SwitchAutomatic & Manual
Emergency Power OFFYes
Switching Time0 ns

Power Description

Load Capacity (VA)6000 VA
Load Capacity (Watt)4200 W
Input Voltage220 V AC
Output Voltage240 V AC

Management

Network ManagementSNMP Manageable

Interfaces/Ports

USBYes

Battery Information

Backup/Run Time (Full Load)8 Minute
Backup/Run Time (Half Load)20 Minute
Hot SwappableYes

Physical Characteristics

Rack Height4U
Form FactorTower

Miscellaneous

Package Contents
  • SmartOnline 6000VA Rack-mountable Tower
  • SU6000RT4U UPS System (with SUPDMB56 detachable PDU module)
  • USB, DB9 and EPO cabling
  • Rackmount installation kit for 4 post rack enclosures
  • Owner's manual and warranty information
Additional Information

Typical Applications:
Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Switches:
Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting power to connected loads.

Low voltage transfer to battery power:
Maintains continuous operation during undervoltages as low as 65V (L1-N:L2-N). Below this point, output is maintained utilizing battery reserves.

High voltage transfer to battery power:
Maintains continuous operation during overvoltages to 140V (L1-N:L2-N). Above this point, output is maintained utilizing battery reserves.

Cold Start:
Yes, inverter can be "cold started" to enable temporary AC output during a power failure.

Software IncludedPowerAlert UPS

Warranty

Limited Warranty2 Year