Call a Mac expert! 888-769-7629
Your Shopping Cart Your Shopping Cart: 0 Items

Your cart is empty.

Smartonline 10000va Rt Puresine 10kva 200-240v 6out Cust Pays F / Mfr. No.: Su10000rt3u

Smartonline 10000va Rt Puresine 10kva 200-240v 6out Cust Pays F / Mfr. No.: Su10000rt3u
$4,034.00
Call for Availability
Item Number: tri-su10000rt3u
Vendor Number: SU10000RT3U
Vendor: Tripp Lite
Note: Shipping charges are not subsidized on this item.
Chat with or call a Mac expert at 1-888-769-76291-888-769-7629
Call for availability

Online, double-conversion protection for mission critical applications

  • Tripp Lite's PowerAlert Software, version 12, has tested compatible with Cisco CallManager, versions 3.3(4)-MCS and 4.0(2)-MCS.
  • 10,000VA / 10kVA online 6U rack / tower UPS with expandable runtime (3U Power Module + 3U Battery Pack)
  • Manual Bypass Switch and detachable PDU enables hot-swap UPS replacement without powering off connected loads
    200, 208, 230 or 240V selectable input/output voltage
  • 2% output voltage regulation over an input voltage range of 156 to 276
  • Simultaneous-use RS232 and contact closure monitoring ports, SNMP/Web Card Slot and EPO interfaces
  • $250,000 Ultimate LIfetime Insurance (USA, Puerto Rico & Canada only).

10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP192V12-3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. Detailed LCD panel with scroll buttons offer detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included. 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and$250,000 connected equipment insurance; extended warranty and service contracts available.

KEY BUYING POINTS

  • 10,000VA (10kVA) on-line, double-conversion UPS system (High voltage input / High voltage output)
    Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
  • Installs in only 6 rack spaces (3U power module / 3U battery pack) with a maximum installed depth of 32.5 inches
    Offers 6 minutes runtime at full load (10,000VA / 8000 watts) and 12 minutes at half load (5000VA / 4000 watts). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
  • Full time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
  • Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
  • Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
  • Standard 3-wire 208V hardwire input connection
  • Two NEMA L6-30R and Two L6-20R output receptacles
  • Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
  • Network-grade AC surge and noise suppression
  • Zero transfer time between AC and battery operation
  • Network management interfaces support simultaneous communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
  • Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software and complete cabling
  • Emergency Power Off (EPO) interface
  • Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status.
  • Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
  • 4 post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available
  • Field replaceable, hot swappable power module and external battery packs
  • Attractive all-black UPS design
  • Two year warranty with $250,000 connected equipment insurance
  • Extended warranty and service contracts available

TYPICAL APPLICATIONS

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

OPTIONS & ACCESSORIES

  • SNMP accessories: SNMPWEBCARD ,ENVIROSENSE
  • External battery pack: BP240V10RT3U ,BP240V32
  • Two Post Rackmount Kit: 2POSTRMKIT (qty 1 required for each 3U module)
  • Hardwire input/Output PDU: SUPDM710HW
  • Extended warranties: 3 Year WEXT3-SU10K , 5 Year WEXT5-SU10K
  • Start-up service plus on-site warranties: 2 Year WOS2-10K , 3-Year WOS3-10K , 5 Year WOS5-10K
  • Start-up service only: WSTRTUP-6-10K

PACKAGE INCLUDES

  • 3U power module with detachable hot-swap PDU input/output panel and bypass switch
  • 3U external battery pack
  • Two sets of 4 post rackmount rails (one for each of the 3U components)
  • One set of tower stands for upright tower configuration
  • PowerAlert software, complete data cabling, user manual with warranty information

General Information

ManufacturerTripp Lite
Manufacturer Part NumberSU10000RT3U
Manufacturer Website Addresshttp://www.tripplite.com
Product LineSmartOnline
Product ModelSU10000RT3U
Product NameSmart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
Product TypeDual Conversion Online UPS

Technical Information

Plug/Connector TypeHardwired
Receptacles4 x NEMA L6-20R
Switching Time0 ns

Power Description

Load Capacity (VA)10 kVA
Load Capacity (Watt)8 kW
Input Voltage220 V AC
Output Voltage240 V AC
Frequency60 Hz
Waveform TypeSine Wave

Management

Network ManagementSNMP Manageable
AlarmImminent Shutdown
Bypass SwitchManual
Emergency Power OFFYes

Battery Information

Backup/Run Time (Full Load)6 Minute
Backup/Run Time (Half Load)12 Minute
Maximum Battery Recharge Time8 Hour

Environmental Conditions

Maximum Operating Temperature104°F (40°C)
Thermal Dissipation3022 BTU/h

Physical Characteristics

ColorBlack
Form FactorTower/Rack Mountable
Rack Height6U

Miscellaneous

Package Contents
  • Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
  • 3U power module with detachable hot-swap PDU input/output panel and bypass switch
  • 3U external battery pack
  • Two sets of 4-post rackmount rails (one for each of the 3U components)
  • One set of tower stands for upright tower con
Additional Information
  • Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions
  • Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 156VAC, below this point, output is maintained utilizing battery reserves
  • High voltage transfer to battery power: Maintains continuous operation during overvoltages to 276V AC, above this point, output is maintained utilizing battery reserves
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Voltage regulation description: On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected nominal voltage at all times
Certifications & Standards

Tested to UL1778 (USA), CSA (Canada), CE (European Union), NOM (Mexico), Class A (Emissions)

Software IncludedPowerAlert Software

Warranty

Limited Warranty2 Year