Call a Mac expert! 888-769-7629
Your Shopping Cart Your Shopping Cart: 0 Items

Your cart is empty.

Powerverter Aps 1250 Ups Inverter 1250w 2out 12vdc-120v / Mfr. No.: Aps1250

Powerverter Aps 1250 Ups Inverter 1250w 2out 12vdc-120v / Mfr. No.: Aps1250
$439.95
Call for Availability
Item Number: tri-aps1250
Vendor Number: APS1250
Vendor: Tripp Lite
Free shipping on this item
Chat with or call a Mac expert at 1-888-769-76291-888-769-7629
Call for availability

Tripp Lite's APS1250 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

General Information

ManufacturerTripp Lite
Manufacturer Part NumberAPS1250
Manufacturer Website Addresshttp://www.tripplite.com
Product LinePowerVerter
Product SeriesAPS
Product NamePowerVerter APS 1250W Inverter
Product TypePower Inverter

Technical Information

Plug/Connector TypeNEMA 5-15P
Receptacles2 x NEMA 5-15R
Protection TypeOverload Protection - Resettable circuit breaker

Power Description

Input Voltage120 V AC
Input Voltage Range12 to 15 V DC
Output Voltage120 V AC ±5 V AC Nominal
Frequency60 Hz ±0.3Hz
Input Current12 A @ 120 V AC
Load Capacity1.25 kW Continuous Power / 2.50 kW Peak Power
Waveform TypePulse-width Modulated Sine Wave
Switching Time6 ms

Environmental Conditions

Temperature32°F (0°C) to 104°F (40°C) Operating
Humidity0% to 95% Non-condensing Relative Humidity

Physical Characteristics

ColorBlack
Power Cord/Cable6 ft
Height7"
Width8.8"
Depth9"
Weight (Approximate)28 lb

Miscellaneous

Additional Information
  • Frequency control for operating stability
  • Coated internal circuit boards offer continuous operation in humid environments
  • Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
  • 6 diagnostic LEDs indicate AC present, on battery, charge rate, overload & battery voltage level (high, medium & low)
  • Functions as an extended run UPS system, standalone power source and automotive inverter
  • AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
  • RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4)
  • Switch allows user to select between off, auto-invert/remote and charge-only settings
  • Configuration switches to allow the user to select the high and low voltage
Package Contents
  • PowerVerter APS 1250W Inverter
  • APS1250 Inverter/Charger
  • Instruction manual with warranty information

Warranty

Limited Warranty1 Year