Call a Mac expert! 888-769-7629
Your Shopping Cart Your Shopping Cart: 0 Items

Your cart is empty.

9pin Modem Data Splitter / Mfr. No.: 9pmds

9pin Modem Data Splitter / Mfr. No.: 9pmds
Qty. Available: 10+
Item Number: bbs-9pmds
Vendor Number: 9PMDS
Vendor: B+B Smartworx (Imc Networks)
Chat with or call a Mac expert at 1-888-769-76291-888-769-7629
Shipping: Usually ships within 24 hours.

All signals entering the female DCE connectors on pin 3 (Transmit Data), pin 4 (Data Terminal Ready), and pin 7 (Request to Send) are diode OR'd together and appear as outputs on the male DTE connector. Pin 1 (Carrier Detect), pin 2 (Receive Data), pin 6 (Data Set Ready), and pin 8 (Clear to Send) are all signals entering the male DTE connector and are connected straight through as outputs on the two female DCE connectors. Signal Ground is connected straight through to all ports on pin 5.

To install the Modem Data Splitter, a straight through 9-pin to 9-pin cable can be used from the computer or terminal to the female 9-pin DCE connectors. Connect the male 9-pin DTE connector straight through to the modem. (B&B model number 9PAMF6.) If your modem uses a DB-25 female connector, use a standard 9-pin to 25-pin adapter cable. (B&B model number 232CAMS.)

General Information

ManufacturerB+B SmartWorx
Manufacturer Part Number9PMDS
Manufacturer Website Address
Product Model9PMDS
Product Name9PMDS 9-Pin RS232 Modem Data Splitter
Product TypeSignal Splitter


Network (RJ-45)Yes

Physical Characteristics